|
|
|
|
Joined: Sep 2013
Posts: 33
Member
|
|
Member
Joined: Sep 2013
Posts: 33 |
Am having a heap trouble faxing on SIP trunks, i have setup for g711 and is using T38. It seems to recieve 3/4 of the page and then gets Comm Error.
It does work set as 'pass through' but i cant make the fax not use T38.
Systrem is a 7030 4.7 software.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
Faxing on sip is hit and miss at best.
T.38 is controlled by the system, if you have the codec set to g.711 and passthrough it shouldn't be using t.38.
T.38 isn't needed when using g.711, only g.729 from memory.
Make sure you are set to g.711a in the sip carrier options for the 1st or 2nd choice (it should re-invite from 1st choice to g.711 as the 2nd choice.
|
|
|
|
|
Joined: Nov 2009
Posts: 602
Samsung Moderator
|
|
Samsung Moderator
Joined: Nov 2009
Posts: 602 |
What nameless said and try turning off ECM (error correction Mode) on the machines themselves. Most of the time this will fix the problem.
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
I forgot about ECM, Also turn off high speed helps
|
|
|
|
Forums84
Topics94,518
Posts639,978
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (AtcomJeff, justbill),
262
guests, and
37
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
