|
|
Joined: Mar 2005
Posts: 245
Member
|
OP
Member
Joined: Mar 2005
Posts: 245 |
Been about three years since I have done any major programming on BCMs and I have never installed two PRIs on one.
Can I put two PRIs on a BCM? (if not the other questions are useless)
If so, Would Telco be master for both PRIs?
Would one PRI have PRI-A and the other utilize PRI-B for the pool outdialing?
Thanks
Last edited by Crowtalks; 10/15/13 04:33 PM.
NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0
MITEL 5000 3300 NuPoint
"If I had known it would turn out like this, I would have become a locksmith"
Albert Einstein
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Feb 2005
Posts: 1,612
Member
|
|
Member
Joined: Feb 2005
Posts: 1,612 |
Yes and Yes
Can also be manipulated but beware of multi companies and Caller ID.
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Moderator-Nortel
|
|
Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
...............Would one PRI have PRI-A and the other utilize PRI-B for the pool outdialing? Thanks That depends on how you are using them. Usings one for dialing out and other for incoming - not usually. But if so then PRI-A and PRI-B. Otherwise - Using both to act like ONE big PRI? Then set them both for the same PRI-A. Using each for dialing a different location or different way? Then two pools. Example: one for local and one for long distant.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
Forums84
Topics93,964
Posts637,402
Members49,703
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
10
guests, and
33
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from telcopc.ca]](https://telcopc.ca/files/pics/small-logo-sig.png){kind=logo}
