sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems NEAX 2000 IPS ext# to port#

I did a quick search and didn't get any incite I'm looking for a way to find the port number to extension number from this system. I know absolutely nothing about them I will be removing it and installing a Mitel 5000 knowing what is where now would save me a lot of time. Nothing in the place is labeled as far as jacks go .... love substandard cable plants
Thanks in advance for any help
Randy

If you're using MatWorx, you do a list-up of program 14.

If you're using MOC mode or CAT mode, you go into program 10 or program 14 and find an unused port. Then try to create the extension number you want to find.

It will respond "SEE CM14 01 123" or something like that. Bingo. Bob's your uncle.

Cmd F52 de Ext no De

Note if en error is returned try prefixing the extn number with an F as that is how a Dterm is programmed so as an example if you have an extension number 211 and it is a dterm, the command would be Cmd F52 de F211 de

Bear in mind that some numbers won't be returned such as an LDN on a console. however if you don't get a result, just go to command 11 and find an unused len then try programming the number against it. The System will not allow dual use of a number and will come back with an error saying SEE wherever it is used!