|
|
Joined: Mar 2013
Posts: 13
Member
|
OP
Member
Joined: Mar 2013
Posts: 13 |
Aloha,
I have read similar threads, but none of them seem to apply (as far as my understanding goes).
I have an Electra IPK II system. Yesterday afternoon, VM stopped working. Dialing the pilot number results in constant ringing, never picking up. Same when calling to to the system from outside. No changes have been made to the system. There is very limited knowledge about this phone system. I am a VoIP guy and understand telephony, but have not had my hands on a digital system such as this NEC. There is no documentation left behind from the installer (the system is 10 years old).
The LEDs lit up on the card are as follows:
CF Power - ON
Live (LED4) - Flashing
CH1 - ON
LED6 - ON
App1 - ON
LED8 - ON
All are red.
Any insight would be greatly appreciated.
Mahalo,
Tony
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2013
Posts: 13
Member
|
|
OP
Member
Joined: Mar 2013
Posts: 13 |
Now it seems auto-attendant has stopped answering as well. Signs pointing to a bigger issue? Can call direct lines in and out ok...
|
|
|
|
|
Joined: Jul 2005
Posts: 1,333
Member
|
|
Member
Joined: Jul 2005
Posts: 1,333 |
I would repower the PBX and see if the mail comes on line again..
Regards,
Paul W
Now back to a 0 day week. Love these 7 day weekends.
|
|
|
|
|
Joined: Mar 2013
Posts: 13
Member
|
|
OP
Member
Joined: Mar 2013
Posts: 13 |
Thanks Paul. I have done that to no avail.
|
|
|
|
|
Joined: Apr 2005
Posts: 2,490 Likes: 1
Member
|
|
Member
Joined: Apr 2005
Posts: 2,490 Likes: 1 |
Some might blast me for this but I have done this at multiple sites. With the system powered up pull the voice mail card, count to 10 and re-slot it. It will take 5 minutes or more to boot up if its going to.
We get old too soon, smart too late
|
|
|
|
|
Joined: Mar 2013
Posts: 13
Member
|
|
OP
Member
Joined: Mar 2013
Posts: 13 |
Did that  Now, can't dial in/out at all. I shut the system off and am staring into space. Will turn it back on again in a little bit, hoping that some divine intervention will resolve the issues. PRI is (well, was) showing LOF. Edited to say that system is back up after reboot. Still no VM.
Last edited by 808bumbye; 11/13/13 10:12 PM. Reason: update
|
|
|
|
|
Joined: Apr 2005
Posts: 2,490 Likes: 1
Member
|
|
Member
Joined: Apr 2005
Posts: 2,490 Likes: 1 |
We get old too soon, smart too late
|
|
|
|
|
Joined: May 2005
Posts: 1,005
Member
|
|
Member
Joined: May 2005
Posts: 1,005 |
Long shot, but is it possible the little black busy-out switch was switched in the down position? If so, switch it back to the up position.
|
|
|
|
|
Joined: Mar 2013
Posts: 13
Member
|
|
OP
Member
Joined: Mar 2013
Posts: 13 |
I was able to get a hold of the guy who installed the system (likely the only NEC tech on this island) and he is coming out with a spare VM card to test with.
And the busy-out switch was in the correct position. Good suggestion (and I wish that WAS it).
|
|
|
|
|
Joined: May 2005
Posts: 1,005
Member
|
|
Member
Joined: May 2005
Posts: 1,005 |
|
|
|
|
Forums84
Topics93,970
Posts637,432
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (ACT in LA),
183
guests, and
18
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
