|
|
|
|
Joined: Apr 2011
Posts: 9
Member
|
|
Member
Joined: Apr 2011
Posts: 9 |
hello
I have a mitel axxess phone system and am trying to find out how I know if I have a PRI card in it. the system has a T1/E1 card but I am told that does not necessarily mean PRI. is there any way to get an inventory of the cards present via telnet?
thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2009
Posts: 1,198
Member
|
|
Member
Joined: May 2009
Posts: 1,198 |
Telnet will not give you that information. In fact, database programming won’t tell you either.
The only difference between a T1/E1 and T1/E1/PRI is the PAL chip present on the board. You would have to pull the card and look for the chip.
|
|
|
|
|
Joined: Apr 2011
Posts: 9
Member
|
|
Member
Joined: Apr 2011
Posts: 9 |
Thanks for the reply. It is too bad there isnt a way to tell without pulling the card.
|
|
|
|
|
Joined: Apr 2011
Posts: 9
Member
|
|
Member
Joined: Apr 2011
Posts: 9 |
does the system need to be powered down to pull the card or can it be pulled, looked at and then put back in without adverse affects(aside from dropping anyone who might be on a call)
thanks
|
|
|
|
|
Joined: May 2009
Posts: 1,198
Member
|
|
Member
Joined: May 2009
Posts: 1,198 |
All cards in that system are hot-swappable, except the CPU/CPC and, of course, the power supply.
|
|
|
|
Forums84
Topics94,565
Posts640,181
Members49,871
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Mark Gee, metelcom),
114
guests, and
228
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
