sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems Sl 1100

Print Thread

Rate Thread

Page 1 of 2

Sl 1100 #567509 03/04/14 06:57 AM
Joined: Aug 2003 Posts: 1,281 Long Island, New York tony3866 Moderator-Telrad
tony3866 Moderator-Telrad Joined: Aug 2003 Posts: 1,281 Long Island, New York	No matter what I do I can not get an ip phone to work over nat. If I put the remote phone directly to a public ip the phone will work. If I put the remote phone on a router, the phone works for about 10 minutes and then it have to reset the phone. Display will still be good but the phone will not respond when you try to go off hook. I was took to extend 84-23-01, but does not help. I have tried 3 different routers, linksys, netgear, d-link and get the same issues Anyone have this issue? Or can help at all. Need Tech Support on any Telrad system

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Sl 1100 tony3866 #567518 03/04/14 10:15 AM
Joined: Apr 2005 Posts: 2,526 Likes: 4 St. Louis, Mo 63025 dans Member
dans Member Joined: Apr 2005 Posts: 2,526 Likes: 4 St. Louis, Mo 63025	What settings have you made in the IP phone? We get old too soon, smart too late

Re: Sl 1100 dans #567534 03/04/14 12:47 PM
Joined: May 2003 Posts: 2,924 mesquite tx brokeda Member
brokeda Member Joined: May 2003 Posts: 2,924 mesquite tx	Sent E Mail.

Re: Sl 1100 tony3866 #567543 03/04/14 02:07 PM
Joined: Aug 2003 Posts: 1,281 Long Island, New York tony3866 Moderator-Telrad
tony3866 Moderator-Telrad Joined: Aug 2003 Posts: 1,281 Long Island, New York	Set to dynamatic Need Tech Support on any Telrad system

Re: Sl 1100 tony3866 #567545 03/04/14 02:32 PM
Joined: May 2003 Posts: 2,924 mesquite tx brokeda Member
brokeda Member Joined: May 2003 Posts: 2,924 mesquite tx	What??

Re: Sl 1100 tony3866 #567566 03/04/14 06:19 PM
Joined: Nov 2001 Posts: 1,640 Philadelphia Pa suburbs ttech Moderator-NEC
ttech Moderator-NEC Joined: Nov 2001 Posts: 1,640 Philadelphia Pa suburbs	Are you using the new 4.0 software? it is supposed to be more NAT friendly. Nec DSX Aspire UX5000 SV8100 SV9100 SL1100 Certified

Re: Sl 1100 tony3866 #567594 03/05/14 03:58 AM
Joined: Sep 2007 Posts: 54 Australia delsar_delsar Member
delsar_delsar Member Joined: Sep 2007 Posts: 54 Australia	On a SV8100 15-05-47 and 15-05-48 would help. NEC warns that on a busy system this may cause problems as the CPU is under more load to process these requests. Hopefully this is on the SL1100

Re: Sl 1100 tony3866 #567598 03/05/14 08:10 AM
Joined: Aug 2003 Posts: 1,281 Long Island, New York tony3866 Moderator-Telrad
tony3866 Moderator-Telrad Joined: Aug 2003 Posts: 1,281 Long Island, New York	3.50 is the version and will upgrade. Trying 15-05-47 and 48 today. Need Tech Support on any Telrad system

Re: Sl 1100 tony3866 #567609 03/05/14 10:36 AM
Joined: Aug 2003 Posts: 1,281 Long Island, New York tony3866 Moderator-Telrad
tony3866 Moderator-Telrad Joined: Aug 2003 Posts: 1,281 Long Island, New York	15-05-47 and 48 did not work. I change them to. 360 Going to upgrade later today Need Tech Support on any Telrad system

Re: Sl 1100 tony3866 #567612 03/05/14 11:09 AM
Joined: Aug 2003 Posts: 1,281 Long Island, New York tony3866 Moderator-Telrad
tony3866 Moderator-Telrad Joined: Aug 2003 Posts: 1,281 Long Island, New York	Could someone tell me what router are they using on the remote side that works. I have tryed 3 difrent routers and still get the. Same issue. Phone connects and wworks for about 10 minutes then dies and reboots. Phone. Works fine if we plug it directly into the cable modem and set the proper static IP address Need Tech Support on any Telrad system