|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
OP
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
I have 2 CS 50's ESI Linked together over a MPLS, at one of the locations I need to setup a remote phone. The customer doesn't want me to put the remote phone on there network so I am setting up internet for this on a different network. Can I have the ESI Link on the MPLS and the remote on the internet I am setting up. The MPLS is on the customers network.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 455
Member
|
|
Member
Joined: May 2005
Posts: 455 |
If the remote phone (or any number of remote phones at different Internet locations) is physically separated on a different Internet connection, it should be able to connect to any cabinet that it's set up for and registered to. It shouldn't matter if there is ESI-Link in use.
|
|
|
|
|
Joined: Feb 2014
Posts: 32
Member
|
|
Member
Joined: Feb 2014
Posts: 32 |
The only way that this will work is if the router that is handling everything is able to handle 2 internet connections, and you can do the routing in that. Since you can not add an IVC card to the 50, and it only has 1 gateway in F822(which now points to the MPLS) that is your route out to the internet. Let us know if you get it figured out.
|
|
|
|
Forums84
Topics93,964
Posts637,402
Members49,703
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
99
guests, and
31
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
