|
|
|
|
Joined: Apr 2007
Posts: 12
Member
|
OP
Member
Joined: Apr 2007
Posts: 12 |
working fine when uninmstalled by IT Relocated and installed all stations work but L1 thru4 cannot be accessed LED lites when line is called but stations will only ring on L5... Have password and manual and have warm booted and Flash 80 -2 and 4...will hire a programmer in Spokane-CDA area if necessary Local IT has skills but no XTS experience rsvp [email protected]
Class A
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Flash 80 button 2 removes all ringing assignments for co lines and puts them all back into co group 1, button 4 defaults the order of the lines..physical port 1 goes back to being line 1 on the display if it was changed of course. I suspect that line 5 is in group 2 and all the others in line 1 and the phones don't have access to group 1 so lines 1 to 4 cannot be accessd. I think a tech dispatch is a good thing...easier than paying for tech to offer support over the phone.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Forums84
Topics94,283
Posts638,767
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
