|
|
Joined: Feb 2010
Posts: 581 Likes: 6
Member
|
|
Member
Joined: Feb 2010
Posts: 581 Likes: 6 |
Hello all, Recently swapped out my 408 GS/LS card for one with ID. For some reason, all calls on all lines are showing "No Caller ID" regardless of how long I let it ring. Click for photo. I get my phone lines through an array of ATA's connected to my Asterisk box. One two-port Cisco 186, and one two-port Linksys. Caller ID works normally on all of them if I plug in a single line phone or my Partner system. I did a board renumber when I first installed the card as always, and all of the ports work fine with no trouble. I tried going into: System Program > Lines/Trunks > More > GS/LS-ID Delay It doesn't let me select any line buttons or do anything at this screen. Any suggestions? Thanks in advance, Scott
Tennessee Technology Solutions, LLC | "Business technology solutions reimagined." | (423) 665-9995 | www.423tech.com
|
|
|
|
|
Joined: Jul 2001
Posts: 3,347 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,347 Likes: 10 |
From the Merlin Legend Pocket Reference:
Release 7.0 software also supports the Caller ID capability of
the 408 GS/LS-ID-MLX module. Although previously orderable,
the Caller ID capability of this module could not be used until
Release 7.0 software became available.
|
|
|
|
|
Joined: Feb 2010
Posts: 581 Likes: 6
Member
|
|
Member
Joined: Feb 2010
Posts: 581 Likes: 6 |
Looks like I need a software upgrade!
Thanks TTT!
Tennessee Technology Solutions, LLC | "Business technology solutions reimagined." | (423) 665-9995 | www.423tech.com
|
|
|
|
|
Joined: Feb 2010
Posts: 581 Likes: 6
Member
|
|
Member
Joined: Feb 2010
Posts: 581 Likes: 6 |
Does anyone have an upgrade card they are willing to let me borrow?
Tennessee Technology Solutions, LLC | "Business technology solutions reimagined." | (423) 665-9995 | www.423tech.com
|
|
|
|
|
Joined: Dec 2005
Posts: 9,181 Likes: 8
Spam Hunter
|
|
Spam Hunter
Joined: Dec 2005
Posts: 9,181 Likes: 8 |
Hey Scott, Swapping out the processor for one that is already R7 V14.2 would be the way to go. Cost-wise, they are not very expensive on the secondary market and probably cost even less on eBay. 
I Love FEATURE 00
|
|
|
|
|
Joined: Feb 2010
Posts: 581 Likes: 6
Member
|
|
Member
Joined: Feb 2010
Posts: 581 Likes: 6 |
It's a shame...I'm so close... Legend 6.1 V11.2.
Tennessee Technology Solutions, LLC | "Business technology solutions reimagined." | (423) 665-9995 | www.423tech.com
|
|
|
|
|
Joined: Feb 2010
Posts: 581 Likes: 6
Member
|
|
Member
Joined: Feb 2010
Posts: 581 Likes: 6 |
Tennessee Technology Solutions, LLC | "Business technology solutions reimagined." | (423) 665-9995 | www.423tech.com
|
|
|
|
|
Joined: May 2011
Posts: 391
Member
|
|
Member
Joined: May 2011
Posts: 391 |
As long as you are swapping processors you should consider a Magix processor. Same price for the most part on the used market. The Magix processor fits into the same clam shell your Legend processor is in. What is the card inventory in your existing system?
|
|
|
|
|
Joined: Dec 2005
Posts: 9,181 Likes: 8
Spam Hunter
|
|
Spam Hunter
Joined: Dec 2005
Posts: 9,181 Likes: 8 |
I think that processor would work. Jack does bring up a good point in that if a Magix processor, (an R4 is my preference) is being sold for the same price as the Legend, it would be worth considering. If you want to connect some Classic Merlin sets, stay with a Legend processor.
I Love FEATURE 00
|
|
|
|
|
Joined: Feb 2010
Posts: 581 Likes: 6
Member
|
|
Member
Joined: Feb 2010
Posts: 581 Likes: 6 |
The issue with Magix processor is I'm using ATL phones. Not willing to lose those phones for caller ID alone.
Tennessee Technology Solutions, LLC | "Business technology solutions reimagined." | (423) 665-9995 | www.423tech.com
|
|
|
|
Forums84
Topics94,471
Posts639,723
Members49,827
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (mtncomm1, Toner),
326
guests, and
25
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
