|
|
|
|
Joined: Sep 2006
Posts: 276 Likes: 1
Member
|
|
Member
Joined: Sep 2006
Posts: 276 Likes: 1 |
Even though I lower the volume on the headset and the speaker to 00, it's still not low as it should be. This is either CO line or intercom. I poked around in Nation Specific and changed some setting on things I didn't know what they were, I couldn't fix it. Any thoughts? Oh, and that's all phones.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Word to the wise, don't arbitrarily change settings in nation specific. It is too easy to mess something up. In your case you need to adjust the DTIB to ACOB setting and possibly the DTI-Spk to ACOB as well. (I assume your customer has analog trunks?). I find it easier to use the pc admin to do this as opposed to using a phone. The settings do not take effect until after a system reset...time to hit the little button!
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Sep 2006
Posts: 276 Likes: 1
Member
|
|
Member
Joined: Sep 2006
Posts: 276 Likes: 1 |
Thank you for the reply. I don't know about wise. My wife sure does't think that. But I did snap shot the initial settings and change them back. However I didn't do any resets. I will try your suggestion and thanks again.
|
|
|
|
Forums84
Topics94,524
Posts640,007
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
195
guests, and
58
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
