Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#57811 09/24/07 11:57 AM
Joined: May 2007
Posts: 86
shrcp Offline OP
Member
OP Offline
Member
Joined: May 2007
Posts: 86
Hi,

I'm having a problem with the call routing table on a Inter-tel Axxess system 6.006. Recently our phone database was restore. After the restore, one of the pattern will not ring into an extension, CRA, or hunt group. It just default to operator or main CRA.

This pattern or phone number should route to an extension when night bell is on instead it's ringing the operator.

GA
Joined: Jun 2007
Posts: 490
Member
Offline
Member
Joined: Jun 2007
Posts: 490
when that happens that indicates that the correct DNIS pattern is not in the call routing table. Any DNIS pattern received that does not have an entry should ring the primary attendant. Add the DNIS pattern to the call routing table with the correct ring in destination and your problem will be fixed.


ShoreTel, Inter-Tel, Mitel, NEC, Zeacom, Cisco, Digium, Adtran Certified
http://www.voipnetworkengineering.blogspot.com
Joined: May 2007
Posts: 86
shrcp Offline OP
Member
OP Offline
Member
Joined: May 2007
Posts: 86
Thanks Chris,

The DNIS pattern I'm referring to does have an ring entry. Also, the DNIS pattern and the ring in destination is correct.

Example: 415-655-9200

Pattern: 9200
ring in extension: 1013

How come incoming does not route to the appropiate ring in entry?

Joined: May 2007
Posts: 86
shrcp Offline OP
Member
OP Offline
Member
Joined: May 2007
Posts: 86
I figure out the problem. The phone number was forwarded to another number by the local phone company when the system went down. I have the local phone company undo the forwarding, however the DID number is still not routing to the appropriate extension. This time when I call into the number. It keeps on ringing. The tech from Inter-tel said it could be that the 4 digit pattern have been removed from the DID table during the process of setting the DID number on forwarding by the local phone company.

Joined: Jun 2007
Posts: 490
Member
Offline
Member
Joined: Jun 2007
Posts: 490
First enable all options in SMDR output then monitor it when calling that number. If it is hitting a span connected to the system you will see the call and it will show the ANI and DNIS. If it isnt coming in, a call to your TELCO is warranted, if it is then there you go you have the correct DNIS pattern being received from the TELCO.


ShoreTel, Inter-Tel, Mitel, NEC, Zeacom, Cisco, Digium, Adtran Certified
http://www.voipnetworkengineering.blogspot.com
Joined: May 2007
Posts: 86
shrcp Offline OP
Member
OP Offline
Member
Joined: May 2007
Posts: 86
Thanks Chris


Moderated by  Stix1 

Link Copied to Clipboard
Advertising Sponsor
Most Recent 5 Post
Samsung pro star dcs
by bditech - 03/07/21 01:00 AM
Samsung DCS power failure
by Telesystems - 03/06/21 09:55 PM
Samsung pro star dcs
by bditech - 03/06/21 05:09 PM
Old Equipment Plan
by MarkAtLMFJ - 03/05/21 04:41 PM
OS 7400 OAS
by John807 - 03/05/21 04:21 PM
Popular Topics (Views)
Forum Statistics
Forums95
Topics94,290
Posts639,138
Members49,425
Most Online5,661
May 23rd, 2018
Today's Birthdays
Ken 1959, NEC Tech, patspidy, Skate4u
Newest Members
Sam Juniper, B Ledford, Jonie4, James Wright, TechnoloJay
49,425 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 33
Ruben 27
pvj 13
hbiss 10
Linked Banner to your Product or Website
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
36 members (RM SYSTEMS, John807, bditech, sundance, Coral Tech, hbiss, paulw, Allied Telcom, Ruben, Touch Tone Tommy, nameless, justbill, westerntelephone, Tech2014, RonP, vicbob, RATHER BE FISHING, Silversam, FoneJacker, Canteleco, KRRath, High Mesa Communications, dexman, nfcphoneman, Iwatsu Guru, hitechcomm, jknichols, Yoda, BTS01, OBT, kevinoffsite, BobRobert, metelcom, MooreTel, morephones, nortelvoip), 495 guests, and 41 robots.
Key: Admin, Global Mod, Mod
Custom Island 58
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners