|
|
|
|
Joined: Mar 2005
Posts: 66
Member
|
|
Member
Joined: Mar 2005
Posts: 66 |
I hope everyone is doing well. I am having an issue finding the Telrad IP Connegy phones. Does anyone know where I can purchase some of these phones. I ordered some Telrad IP phones from a vendor that I use and they sent me the Telrad Avanti IP phone which looks like the Connegy phone but does not use the 48vdc power transformer. I would assume the Telrad Avanti is a POE setup. Will the Telrad Avanti even work with the TVSE card? I'm running a IPEX2 system version 3.12
Sincerely,
kkell11400
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2005
Posts: 274
Member
|
|
Member
Joined: Feb 2005
Posts: 274 |
Your post sounds a little confusing. Telrad made an Avanti digital phone and a Avanti IP phone. The two line display modules of both types look identical other than the IP version has a 48V receptical and two ethernet hookups, one in and one out. Typical for IP phones. The digital version has a RJ11 hookup and that is it. Most of the ones that are IP had the IP Telrad logo on the front. (Although I have seen some that had the normal logo).
If you have a phone without the IP 48V hookup, then it is probably the digital version, not IP. This type would need to be on a ULD card, not the TVSE.
The IP versions are POE ready.
There are plenty of vendors that will sell you the IP version, Just google it. Or send me a pm, I have a few in stock.
TG
|
|
|
|
Forums84
Topics94,515
Posts639,949
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
