Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#580197 11/05/14 08:37 PM
Joined: Jul 2014
Posts: 2
Member
OP Offline
Member
Joined: Jul 2014
Posts: 2
I have a TDA200 with digital terminals, but we a requirement where 4 wireless phones are required on a remote location (wireless mandatory).

The remote location is going to be connected trough VPN to the office with the TDA200. I have seem that the the cell stations TDA015x require a wired connection back to the PBX, any other idea on how o get those 4 wireless phones connect to the main location?

Tahnk you

Atcom VoIP Demo
VoIP Demo
Joined: Jan 2008
Posts: 227
Member
Offline
Member
Joined: Jan 2008
Posts: 227
Not sure that it could work, for I haven't done this, but you can try using the wireless cell station(s)??

Maybe someone else on the forums has.


Tele-Net Technologies
Certified Panasonic dealer
Joined: Jan 2007
Posts: 2,102
Likes: 1
OBT Offline
Admin
*****
Offline
Admin
*****
Joined: Jan 2007
Posts: 2,102
Likes: 1
You could upgrade the tda to a tde with main board and dsp card then use ip dect cell stations

plan b would be to use 4 Cisco SPA3102 on each side. they can take a slt extension in on side a and return it on side b. lift off handset on side b and it gets dial tone from system. have used before as a cheaper solution.

you can put cordless phones on side b depending on the area you want to cover


“I have not failed. I've just found 10,000 ways that won't work.”
Joined: Jan 2008
Posts: 227
Member
Offline
Member
Joined: Jan 2008
Posts: 227
Good catch OBT. I didn't see that he has a TDA. I have got to get new glasses.


Tele-Net Technologies
Certified Panasonic dealer
Joined: Jul 2014
Posts: 2
Member
OP Offline
Member
Joined: Jul 2014
Posts: 2
I was told that NCP0158 can work updating the TDA software and adding and IP extension card, but I don't see the TDA on the NcP0158 manual or any other reference. the SPA3102 solution sounds good!.

Last edited by Mario Gzz; 11/05/14 09:26 PM.
Joined: Jan 2007
Posts: 2,102
Likes: 1
OBT Offline
Admin
*****
Offline
Admin
*****
Joined: Jan 2007
Posts: 2,102
Likes: 1
There is no software only upgrades you would need hardware

MPR Card Conversion
IP Convergence Main Processing Card

and a DSP 16 card with this you can get either ip dect cell station or wifi sip phones

they could be talking about a 16 IP propriety telephone card that can go into the tda, but that will only get you IP telephones

Last edited by OBT; 11/05/14 10:38 PM.

“I have not failed. I've just found 10,000 ways that won't work.”

Moderated by  Carl Navarro, OBT 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,739
Posts636,410
Members49,618
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
Salman Imtiaz, SayWhat, Tariq
Newest Members
Homer Domer, Lane, AMS Technology C, Chrontel, RonZ1971
49,617 Registered Users
Top Posters(30 Days)
jsaad 7
Toner 7
Who's Online Now
1 members (nortelvoip), 123 guests, and 22 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5