sundance-communications.com/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems TDA50G Join Call

If extension 100 is on an active call on CO line 1, is there a setting that will allow extension 101 to join the call by pressing the CO line 1 button? I know extension 100 can simply conference in extension 101, but the end user wants a simpler solution.

1.3.51 Privacy Release
You can let a third party join your current outside call and establish a three-party conversation.
You can also leave the conversation and then let the two other parties talk.
To let a third party join your conversation and establish a three-party conversation
Press green
S-CO.
Wait for an answer.
To prolong, press
the S-CO again.
PT/PS
Talk.
C.Tone
Off-hook.
Your extension (on the outside call)
The S-CO button will flash
at all extensions that have
Other extension that S-CO button.
(S-CO)
(S-CO)
Press the flashing
S-CO within 5 seconds.
A three-party conversation
is now established.
Talk.
C.Tone
• Only an S-CO button can be used for this operation.
• You can leave a three-party conversation and let the two other parties talk by simply going
on-hook.