|
|
|
|
Joined: Jun 2014
Posts: 14
Member
|
OP
Member
Joined: Jun 2014
Posts: 14 |
Hi guys,
I've set up Gamms SIP trunks using networking mode on an SV8100.
When I try and dial out on them I get an error tone when selecting the trunk, when I dial in i get a busy tone.
I've set up the SV8100 according to the compatablilty report.
on the router (draytek 2820) i've switch off the SIP ALG and have ports 5060 UDP and 6000 - 40000 UDP forwarded to the IPLB.
When running a wireshark trace calling in i get "486 - Busy Here"
Has anyone got any ideas as to whats happening?
Thanks
Stu
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2005
Posts: 2,503 Likes: 2
Member
|
|
Member
Joined: Apr 2005
Posts: 2,503 Likes: 2 |
What are your settings in 84-26?
We get old too soon, smart too late
|
|
|
|
|
Joined: Jun 2014
Posts: 14
Member
|
|
OP
Member
Joined: Jun 2014
Posts: 14 |
VoIP Gateway IP Address RTP Port RTPC Port
1 10.1.0.199 10020 10021
|
|
|
|
|
Joined: Apr 2005
Posts: 2,503 Likes: 2
Member
|
|
Member
Joined: Apr 2005
Posts: 2,503 Likes: 2 |
Stu,
I apologize for asking the wrong question.
Since you are unable to dial out or receive calls you need to start from the beginning. Make sure the system is licensed for SIP and double check all settings including the information given to you from the SIP provider.
We get old too soon, smart too late
|
|
|
|
|
Joined: Jun 2014
Posts: 14
Member
|
|
OP
Member
Joined: Jun 2014
Posts: 14 |
i got it sorted - a good ol' system initialization.
thanks =)
|
|
|
|
Forums84
Topics94,294
Posts638,833
Members49,768
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
131
guests, and
400
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
