|
|
|
|
Joined: May 2014
Posts: 7
Member
|
OP
Member
Joined: May 2014
Posts: 7 |
Had a Bogen 250 amp go bad and replaced with same. Location has two total amps, one for office and one for plant. After replacing amp there is random "ding dong" broadcasting thru both the plant and office speakers.. Person onsite did the install. Said they moved all cables back as they were on bad amp. Paging works.. just getting this random ding dong sound since the replacement. any idea's?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2005
Posts: 9,285 Likes: 6
Admin
|
|
Admin
Joined: Sep 2005
Posts: 9,285 Likes: 6 |
If its a TPU250 then it has a built in ringer circuit. Make sure nothing is connected to contact ringer and that ringer volume is off.
|
|
|
|
|
Joined: May 2014
Posts: 7
Member
|
|
OP
Member
Joined: May 2014
Posts: 7 |
new info - had some pics sent to me.. There are two Viking MTG-10 tone generators connected to the AMP's. It is a TPU250.. and will check those settings but the sound is going out both the plant and office amp. I know nothing changed on the office amp.
|
|
|
|
|
Joined: Feb 2005
Posts: 1,037
Member
|
|
Member
Joined: Feb 2005
Posts: 1,037 |
Look at the time of the chimes possibly a time clock connected to the Viking units. Find out the whats and whens of the Viking units ....what are they used for how they are controlled. Sounds like it would be needed to go to site and check/rewire the AMP, can be the person on the far end is mistaken.
|
|
|
|
|
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
|
|
Moderator-Vodavi, Vertical, XBlue
Joined: Feb 2009
Posts: 3,136 |
But isn't the customer always right? 
- Dave S. -
You can never appease your ideologue opponents.
|
|
|
|
|
Joined: Feb 2005
Posts: 12,344 Likes: 3
Member
|
|
Member
Joined: Feb 2005
Posts: 12,344 Likes: 3 |
Person onsite did the install. Said they moved all cables back as they were on bad amp. Paging works.. just getting this random ding dong sound since the replacement. any idea's? I don't know what you want us to tell you. All the information we get is third hand. The first thing I learned is that if I can't confirm anything myself I'm wasting both mine and the customer's time. The second thing I learned is that if I don't know what I'm doing I have no business doing it. Get somebody there that knows what they are doing and not asking you so you have to ask us. -Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
Forums84
Topics94,296
Posts638,846
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nonameyet),
165
guests, and
299
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
