|
|
|
|
Joined: May 2009
Posts: 17
Member
|
|
Member
Joined: May 2009
Posts: 17 |
I inherited a OfficeServ 7200 from a company that went out of business. I did a reset on it through the dipswitch on the MCP card, but I cannot seem to find it on the network on 10.0.0.1 which I read in the manual is the default ip address. This system only had ip phones so I cannot access the MMCs through a keyset. Is 10.0.0.1 the correct address to look for or is there another way to reset the system to factory defaults.
Thanks in advance
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
It should be 165.213.176.10 or 165.213.176.100
|
|
|
|
|
Joined: May 2009
Posts: 17
Member
|
|
Member
Joined: May 2009
Posts: 17 |
Thanks it wasn't either of these I got out wireshark and it ended up being 165.213.109.156. When I tried to open up device manager from the IP it didn't load as well, but I downloaded the standalone device manager and was able to connect. It looks like I have an old SW version 10.05.03 V4.46d. Is this updateable to V4.75. Any resources for an end user to do this themselves
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
If the processor is an MP20 then you can, if it's an MCP then you're on the highest available.
DM was released with V4.60 software, so anything earlier won't have the embedded DM.
Sw upgrades are best performed by trained technicians.
|
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
173
guests, and
31
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
