|
|
|
|
Joined: Dec 2008
Posts: 83
Member
|
|
Member
Joined: Dec 2008
Posts: 83 |
Hey Everyone,
Attended my first class today for the Summit system
As most of you know from previous post I have been curious about PRI setup on the Summit as well as the SBX
Anyway I questioned the instructor Mario today about the cable connection from the carrier to the Summit. He mentioned using a network cable between the carrier and the Summit. I questioned it and indicate I thought you need a traditional TI/PRI crossover cable. He said no that they have taken that into account and as a result you can just use a straight network cable between the two.
Not sure how many have done Summits with PRI yet, so I figured I would just pass this along.
The training document/presentation that they used for the class was pretty good outline capacities, slot locations, etc. Today's class has a slightly updated version from the one I found on V-Connect. Not much.
Jon
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Well, we shall see. This means the Summit is self sensing like a data switch when a data cross over cable is connected. I have found that using cross over cables is defined by the carrier's delivery method. With Cox a fiber pri doesn't need one, but their voice manage IAD soft switch pri does with most phone systems. If the summit works with a standard network cable either way, that is a good thing.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Dec 2008
Posts: 83
Member
|
|
Member
Joined: Dec 2008
Posts: 83 |
Agreed... Believe me I will have all cables with me to ensure I don't run into a problem.
|
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
As you most likely already know, A PRI uses pins 1,2 and 4,5. The Summit dual co ports are wired the same way. First line pins 1,2 second 4,5.
Last edited by Derrick; 03/25/15 05:53 PM.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Forums84
Topics94,525
Posts640,011
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
199
guests, and
50
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
