web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Feb 2010
Posts: 18
Member
OP Offline
Member
Joined: Feb 2010
Posts: 18
i need a step by step sip extension programing on nec sl1000
please i am trying to conncet a mitel sip phone.
thank u guys

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Feb 2013
Posts: 122
Member
Offline
Member
Joined: Feb 2013
Posts: 122
First : you should have SIP 3rd party license on system or you can try it with 60 days trial mode
Second : go to PCPro tool of SL1000 then filter options ==> IP phone list then select one ext number you will find it on command 15-05 select it and go to item 15-05-16 and give it authentication password upload unsaved data to the system then disconnect from PCPro

Third : then go to your mitel phone and give it the registrar server is your VOIPDP IP on command 10-12-09 with port 5070 and authentication password and reboot it i think it will connect to system and get internal dial tone



NEC Business Partner
Certified on SV8100,SV8500,SL1000
Joined: Feb 2010
Posts: 18
Member
OP Offline
Member
Joined: Feb 2010
Posts: 18
i did that programing but i get bad request on mitel phone.

do i need to programm sip trunk.

Joined: Oct 2004
Posts: 1,491
Member
*****
Offline
Member
*****
Joined: Oct 2004
Posts: 1,491
no but you do need a license and an VOIP daughter board

Joined: Oct 2012
Posts: 251
Member
Offline
Member
Joined: Oct 2012
Posts: 251
If this is an off-site phone, you will also need to do the port forwarding on the router for the registration and audio ports.


www.highspeedtele.com
Dallas & Fort Worth, TX
Joined: Feb 2010
Posts: 18
Member
OP Offline
Member
Joined: Feb 2010
Posts: 18
i have a sip extension license and voip and memdb. my nec sl1000 is connected to a switch, my mitel phone is connected to the same switch. nec voip 172.16.0.10 and mitel sip phone 172.16.0.35 on mitel phone phone i get no reg. can any one help please.

Joined: May 2003
Posts: 2,924
Member
*****
Offline
Member
*****
Joined: May 2003
Posts: 2,924
10-12-9 and 10?

84-26?

Joined: Aug 2005
Posts: 560
Member
Offline
Member
Joined: Aug 2005
Posts: 560
I agree with brokeda - make sure you have assigned an IP address for DSP in 84-26. I usually use one higher than the VoIP daughter board IP address.

Also, make sure your Mitel is set to the correct port for registration (5070).

The SIP phone will be assigned to the extension number just above the highest hardware equipped extension in the system. For example if you have 8 digital stations and 4 SLTs you are using station ports 1-12. The extension number on port 13 will be the "user name" programmed into the SIP phone.


Joined: Feb 2010
Posts: 18
Member
OP Offline
Member
Joined: Feb 2010
Posts: 18
can i add pictures to show u guys my programming


Moderated by  ttech 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5