
All,
I have a 3 node CS-5200 (ver2.3.6) with Enterprise Messaging on node 1 covering all 3 sites.
I'm trying to setup an application so that when a caller (either outside or IC)is transferred to an extension, they will get a message allowing them to continue to hold or "Press 1" to leave a voice mail if the extension that they are calling is either busy (user is on the phone), or not answered (after like 4 or 5 rings).
Example - Extension 8330
Call arrives on either main line (rings x8300) and is transferred to extension 8330
Call arrives on DID 3030 and answered by application 88330 (fax detection), hears 5sec pause and timeout transferred to x8330
I've created a Digit Translation application 89330 with the following options: 0-Operator -1 Transfer to voicemail box 8330 timeout-transfer to extension 8330. Recall dest is 89330. 2 recordings - 1-Message giving options 2-5sec pause to allow time for caller to input choice or timeout
I've created 2 system fowards: 1-Voicemail x20100 and 2-Overflow x88330
I've enabled System Foward #1 for only DND status on all call types. System Foward #2 is enabled for No Answer, Busy status on all call types.
My plan was to create a System Foward for each extension.
This seems to work perfect if extension is in DND - call goes directly to voicemail. Works perfectly for no answer - caller gets messange and has option to remain on hold or voicemail. The problems comes in on a busy extension - The caller get's the message, but if they choose to hold, as soon as the application is done, if the extension is still busy they get the message again (immeadately).
The majority of our calls come in on a main number which rings via a STAR at the recepionist desk and she transferrs the callers to the different exteions, or they arrive via DID and are answered by a seperate Fax Detection application that timeout transferrs to the extension. There is a seperate application for each extension for both fax detection (#s: 88NXX) and "station overflow" (#s:89NXX) I'm trying to provide a way for a caller to remain on hold indefinately (our callers will wait for ever!) without recalling to the origional extension, but also allow them to leave a voicemail if they choose.
Am I going about this the right way? Any suggestions on how I can solve my busy extension problem? :shrug:
Thanks,
Matt :bang: :bang: UPDATE :bang: :bang:
All;
I think I'm headed in the right direction.
I'm going to have to have a separate hunt group for each extension (with only that extension as a memeber) with a seperate system foward forward for each extension that fowards on No-answer and Busy status to the appropriate hunt group.
I'm a little confused as to where i need to input the "station overflow" application: Announcement, Overflow, and Recall??
I would like the announcement to play initially, and then every 30 seconds or so - I'll settle for just every 30 seconds if I'm getting too fancy.
Your thoughts and suggestions and comments are appreciated!
Thanks,
Matt