atcomsystems.ca/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems password for toshiba

Looking all over the internet,cant seem to find default password for Toshiba strata280,any help much appreciated,thanks

Dont you have the books ?

Your profile is pretty sketchy and you appear to be an end user .In that case i recommend you call a local Toshiba dealer.

As Ken states your profile tends to be one of a end user and password information is not passed on to end users for the simple reason that with this information severe problems will be a result of a non trained/certified technician attempting to make changes.

The Toshiba Strata 280 is the telephone system and it does not require a password to program only a sequence of keys/buttons pressed using the telephone itself. Now the voicemail systems do require one but there are a few different ones that can be used so knowing what password you need is dependent upon which voice mail you have.

Once again only a certified/trained individual should be working on your telephone system, its kind of like your dentist.... you don't want just anyone that thinks they know what they're doing to be poking around.

i understand that i have been doing phone systems for 30 years,just havent done any programming on this dk280,customer out of options wants me to figure out programming,cant be that hard,been looking for programm manuals on internet,any suggestions,all i need to do is have main number ring extension 224 and then programm buttons on another extension,i know i need to do it on port 5 with a 20 button set,any help much appreciated,i will get familar with programming before i attempt to do it,thanks to all

Once you have a program manual and a 20 button Display telephone you'll be set to go...Good Luck.

thteanks bob appreciate it,where is best site to get a programming manual any suggestions to all let me know,thanks

thanks i meant cant type today,must be the heat in vegas lol

Therss a button above for manuals or google it

There is no password for a DK 280 ??

There's a super-secret handshake required to get into programming, but I don't recall needing a "password". Then again it's been ages since I touched a DK.