|
|
|
|
Joined: Nov 2004
Posts: 149
Member
|
|
Member
Joined: Nov 2004
Posts: 149 |
I have a customer who has outgrown their TDA100 cabinet, They'd like to upgrade to a TDA200 for the extra slots/ports. Is that possible? What's involved? Many moons ago, I swapped a DBS 72 to a 96 cabinet and all it took was putting all the cards back in the same slot number as in the old cabinet, couldn't have been simpler. I'm hoping it's that easy, other than the probability of adding an MEC card on the MPR.
Or am I over complicating things again, I have a habit...
Thank You in advance.
"It's like the man said...never take life too seriously, you'll never get out of it alive" Bugs Bunny
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
Unless you get a empty cabinet or second hand unit you will have to go to the tde platform. I would recommend doing this as the tda is not supported and you will have to go that route at some stage.
The programming tool has a tool to convert the system from tda to tde
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
|
Joined: Mar 2004
Posts: 488
Member
|
|
Member
Joined: Mar 2004
Posts: 488 |
The TDA and TDE were discounted in Canada this spring. I had two sites that still had the TDA. I upgraded both it takes about 2 hours start to finish. I put both on their networks so they could make programming changes themselves
|
|
|
|
Forums84
Topics94,513
Posts639,938
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
167
guests, and
44
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
