|
|
|
|
Joined: Feb 2014
Posts: 48 Likes: 1
Member
|
|
Member
Joined: Feb 2014
Posts: 48 Likes: 1 |
Hello all -
I have a CCTV camera system set up inside an office. There is an Ethernet cable going out from the main camera system to a modem, where it is accessed via IP address.
I would like to add the IP capabilities to another network in the building, but there is only one Ethernet-out port on the camera system. If I use an Ethernet splitter and run one of the cables to each of the modems, would that present any problems??
Thank you
Matteo
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2001
Posts: 1,390
Member
|
|
Member
Joined: Apr 2001
Posts: 1,390 |
|
|
|
|
|
Joined: Feb 2014
Posts: 48 Likes: 1
Member
|
|
Member
Joined: Feb 2014
Posts: 48 Likes: 1 |
|
|
|
|
|
Joined: Mar 2005
Posts: 588
Moderator-Mobil Phones, Computers
|
|
Moderator-Mobil Phones, Computers
Joined: Mar 2005
Posts: 588 |
That would not work at all. A solution would be to open the web interface port for the CCTV system to the internet and then the other network could access the CCTV system via its public IP address.
|
|
|
|
Forums84
Topics94,515
Posts639,950
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
