Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jul 2011
Posts: 12
SeaOx Offline OP
Member
OP Offline
Member
Joined: Jul 2011
Posts: 12
My customer had a power outage and when the system came back up, database was wiped clean (less than 24 hours). I replaced the MCC, and the compact flash with new and was able to get the system back to a default state where modifications could be made to the database. I've tried two different backups and they result in the system going into a boot loop with H -. Interrupt makes no difference, other than occasionally it freezes at H - interrupting the boot loop.

So far, I have changed:

Bay
MCC
Program Card
BCC

to no avail. The only piece of the puzzle left is the ID chip. Could the ID chip be the culprit here? Any advice other than shoot it?


Josh Poole
Installation and Technical Specialist
Cox Communications & Electronics
Atcom VoIP Demo
VoIP Demo
Joined: Feb 2006
Posts: 1,716
Member
***
Offline
Member
***
Joined: Feb 2006
Posts: 1,716
When replacing the MCC and Flash, you need to first load the MOC before trying to upload a backup.

Rcaman


Americom, Inc.
Where The Art And Science Of Communications Meet

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,827
Posts636,761
Members49,644
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
btakac, Dave Turner, davidfish, iamflip, John D, jreid, kovets
Newest Members
PhoneGuy827, julesm, Helen.D, AlAl, mike hurford
49,643 Registered Users
Top Posters(30 Days)
ramo 12
pvj 11
Toner 9
Who's Online Now
0 members (), 233 guests, and 16 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5