|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
Greetings, We upgraded our office 7100 from 4.85 to 4.9x, no issues ran smooth. We recently changed our IP scheme from 10.10.11.xxx to 192.168.88.xxx changed the IP address in the 7100 to 192.168.88.005 gateway 192.168.88.1 sub net 255.255.255.0 Via latest DM. Constant bootloop no matter what we did. We reinitialized the system and restored to our 4.85 back up. Anybody else have this issue? Thanks
John 807
|
|
|
|
Joined: Jun 2006
Posts: 2,965 Likes: 3
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 2,965 Likes: 3 |
So is the system running 4.9x or did you put everything back to 4.8x?
I've never had an issue with this. What version of 4.9 did you goto?
|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
The system is running 4.91 and currently running clean. 4.91 was what we had upgraded to.
John 807
|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
Later today I'm going to change the address back to the 10.10 address via telset and see what happens.
John 807
|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
o.k. changed the address via telset no issues. Either tonight or tmw will try with DM again. might have been a one off fluke.
John 807
|
|
|
|
Joined: Jun 2006
Posts: 2,965 Likes: 3
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 2,965 Likes: 3 |
how do you change via telnet?
|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
I don't know I did it from the phone. Which I have always referred to as TelSet programming. Is it also called something else? Thanks
John 807
|
|
|
|
Joined: Jun 2006
Posts: 2,965 Likes: 3
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 2,965 Likes: 3 |
My bad, i misread telset as telnet.
It's referred to usually as keyset or KMMC programming.
|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
Ahh I'm an old Nortel guy and there it was known as TelSet programming as opposed to Business Manager which was their name for OSDM or DM.
John 807
|
|
|
|
Joined: Dec 2010
Posts: 679
Member
|
Member
Joined: Dec 2010
Posts: 679 |
Assuming since you attempted to change the ip address via DM and it was connected to the system, you sent it for a whirl. Best way to change IP address on a system is using the keyset like you later did.
|
|
|
Forums84
Topics93,824
Posts636,752
Members49,644
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Coral Tech),
40
guests, and
37
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|