|
|
|
|
Joined: Oct 2006
Posts: 1,417 Likes: 7
Member
|
|
Member
Joined: Oct 2006
Posts: 1,417 Likes: 7 |
A couple more questions about my current 3-site SL1100 project.
Speed Dial - Would like the customer to press a “Speed Dial” key, then a bin number to call that phone number. This works if going off hook = intercom, and the phone number in the bin starts with a 9. But I have a trunk selected from the route table, which only works if the additional data for the key is a bin number. Seems to defeat the purpose.
Call Forward - Also working on Call Forward, to an outside number, invoked at various times by the user. Should be able to just create a CF key. The user presses CF, then enters the destination number. Press it again to turn off. But the manual says CF-Off Premise doesn’t work on ring group calls. The whole point of this is to route calls in the ring group to an outside number!
Backlight - Does anyone leave the display backlight on all the time? 15-02-46 = Continuous. Any problems with premature display failures? Etc.?
Thanks for any help. I appreciate it!
Jim
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 195 Likes: 3
Member
|
|
Member
Joined: Jan 2008
Posts: 195 Likes: 3 |
I don't fully understand the call forward issue. Is the forward in a no answer condition? If so, could just send it to a virtual forwarded to the outside number.
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
