|
|
|
|
Joined: Aug 2012
Posts: 73
Member
|
|
Member
Joined: Aug 2012
Posts: 73 |
I have a box full of Polycom SoundStation 2w and none of them will pair with any ond the bases. I know the bases work as I've paired a Dect phone to them and it works perfectly.
Any Ideas?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2016
Posts: 1
Member
|
|
Member
Joined: Aug 2016
Posts: 1 |
Hello!
In regards to your paring issue what is needed is for you to take apart the base and re coat the paring keys conductive side with wire glue or nickel print let dry, don't use to much either. Once dry test continuity on the pad with a multi meter- re-assemble and try paring again.
- Best Will
|
|
|
|
|
Joined: Aug 2012
Posts: 4
Member
|
|
Member
Joined: Aug 2012
Posts: 4 |
I was just checking Polycom online support because I have a 2W doing (or not doing) the same thing. I'm going to try the tip above. However there's a notice on the Polycom site that this model needs a software update to alleviate this problem if you have an older unit. To check, press MENU, chose THIS PHONE, and then SYSTEM INFORMATION. IF the DSP version is 1.600 or lower an upgrade might help.
I thought I was smart, and then I got into telephones...
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
342
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
