|
|
|
|
Joined: Sep 2015
Posts: 7
Member
|
OP
Member
Joined: Sep 2015
Posts: 7 |
I'm trying to mirror the port on our 3300 MXe III so I can run a Wireshark capture. I've done this before, but it is not working now. I connected via a raw session to port 2002 and entered xmirror "2 1" command. The interface says the mirroring is in place, however, I seem to recall the lines on the second port were lit, even without a PC connected to it. Now they are all dark. I run the icpL2StatShow 2 command and the port status says "Down". How do I change it to "Up"? Is there another port I could use? Any help or suggestions would be appreciated. Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
134
guests, and
419
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
