|
|
|
|
Joined: Oct 2006
Posts: 1,417 Likes: 7
Member
|
|
Member
Joined: Oct 2006
Posts: 1,417 Likes: 7 |
I just found out that one of my systems has never been able to use speed dial. It was set up like the other two systems that went in at the same time as this customer (almost setup the same).
POTS lines. Customer picks up receiver, icm dial tone, dials 9 and the number. Speed dial bins have 9 + number. Turns out there is a setting in 13-01-01 called Speed Dial Auto Outgoing Call Mode. It was set for Trunk Access, and speed dial calls failed. My other sites had this set for Intercom Access.
Just had to change the setting to Intercom Access to make it work. Easier than removing all the 9's from the speed dial bins. But I'm wondering if one way is better than the other, or just whatever works in your situation?
Thanks.
Jim
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 4,228 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,228 Likes: 2 |
Adding the 9's is more work but they wouldn't put it in there if they hadn't expected different things.
|
|
|
|
Forums84
Topics94,565
Posts640,180
Members49,869
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
15
guests, and
52
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
