|
|
|
|
Joined: Aug 2016
Posts: 1
Member
|
|
Member
Joined: Aug 2016
Posts: 1 |
I have been working on older Adix systems (7.32) the use the Windows 3.2.9 and version 4 and 5 programmers. But I am having trouble getting the comm working thru the 9-pin serial port. Other techs say the problem is the laptop computers we use are dual-core and they prevent the older programmers from running properly.
The programmers seem to run with no errors on Windows 7, but they will not connect to any older systems. Any ideas?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,811 Likes: 15
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,811 Likes: 15 |
The 3.2.9 programmer will only work back to software version 6.0. Anything before that requires the dreaded version-specific DOS programmer.
I have a dual core Windows 7 laptop that runs all the programmers just fine. Some of the DOS programmers required a little tweaking, but still work fine as well.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
|
Joined: Apr 2016
Posts: 8
Member
|
|
Member
Joined: Apr 2016
Posts: 8 |
I had to right click on the installer and select Troubleshoot compatibility to get Windows 7 to install a very old Iwatsu programmer.
Also, I use a DB9 to RJ45 adapter I built after I found the pinout.
|
|
|
|
Forums84
Topics94,515
Posts639,962
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
