|
|
Joined: Jun 2016
Posts: 16
Member
|
Member
Joined: Jun 2016
Posts: 16 |
hey everybody good morning from SoCal. So I have a 50 that is running off analog trunks. It has a SIP card in it as well because the site was to install a better internet and they finally did. I can convert to SIP ok but i have two questions I'm hoping somebody can clear up. 1. Right now there is a corp. # going to one ext. as a second tenant- Not sure why my tech set it up that way. Do i duplicate that in F224 as a DID to an ext (it will be a SIP #. 1 of 2 numbers) 2. Has anybody used the Netgear FV5318G for SIP-this is what they have now?What was your experience in using this with SIP.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Feb 2006
Posts: 1,716
Member
|
Member
Joined: Feb 2006
Posts: 1,716 |
What DNIS digits are being sent? That what determines where to put that number. If there are no DNIS digits, then you need to segregate the SIP Trunk and send it to the station it's supposed to ring.
That Netgear is a firewall as well as a gigabit switch. It should work just fine providing it's programmed correctly.
Rcaman
Americom, Inc. Where The Art And Science Of Communications Meet
|
|
|
|
Joined: Jun 2016
Posts: 16
Member
|
Member
Joined: Jun 2016
Posts: 16 |
No DNIS Digits so do I use F224 to do this segregation?
thanks for the info on the router
|
|
|
|
Joined: Feb 2006
Posts: 1,716
Member
|
Member
Joined: Feb 2006
Posts: 1,716 |
F2141. Program it like you would F211.
Rcaman
Americom, Inc. Where The Art And Science Of Communications Meet
|
|
|
Forums84
Topics94,492
Posts639,865
Members49,836
|
Most Online5,661 May 23rd, 2018
|
|
1 members (justbill),
282
guests, and
46
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|