web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#605739 11/22/16 10:52 PM
Joined: Jan 2006
Posts: 340
meisgq Offline OP
Member
OP Offline
Member
Joined: Jan 2006
Posts: 340
I need some guidance as to how to properly support a vertical data cable run. For example, if I have machines in a warehouse that require network drops from the rafters to the machine at 6' above finished floor, how should the cable drop from the ceiling to machine? We've used various solutions in the past but I get the feeling that we're doing it wrong. We've had techs tie cables to flexible power cords with strain reliefs (not correct), run cables inside EMT secured from rafters to the machine, and free-run it from the rafters with only a loop at the top as support. I've thought about using flexible cords or FMC as conduits but that didn't sound right. Any advice would be appreciated. I want to get this right.


Shawn
Absolute Communications, Inc.
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

meisgq #605740 11/22/16 11:46 PM
Joined: Feb 2005
Posts: 12,342
Likes: 3
Member
***
Offline
Member
***
Joined: Feb 2005
Posts: 12,342
Likes: 3
How high are the rafters- in other words how long is the drop? There is no magic solution here. If you want to spend money they make "power poles" that you will see in stores dropping down to the POS terminals at the checkouts. These handle both power and data. I think in your case EMT conduit is a good choice. I would choose a large enough size to minimize flexing- depending on the rafter height.

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
meisgq #605741 11/23/16 12:08 AM
Joined: Jan 2006
Posts: 340
meisgq Offline OP
Member
OP Offline
Member
Joined: Jan 2006
Posts: 340
They are about 20ft high. They only require 1 cable per drop so a power pole would be overkill. I'm thinking 1/2" EMT but I believe EMT also has to be secured at least once every 10ft. Basically, if you have two sticks of EMT hanging from the ceiling, it is not legit. That's why I'm having such a difficult time trying to determine the code-compliant method.


Shawn
Absolute Communications, Inc.
meisgq #605742 11/23/16 12:44 AM
Joined: May 2007
Posts: 5,058
Likes: 5
Moderator-1A2, Cabling
*****
Offline
Moderator-1A2, Cabling
*****
Joined: May 2007
Posts: 5,058
Likes: 5
I'd have to double check, but I believe you could run a piece of strand from the ceiling down to the floor and support the cable to it. (Basically an OSP horizontal run brought indoors and run vertically).

For a 20' drop, you wouldn't need much of a strand (¼", maybe...)

You could also run kindorf (unistrut) from the ceiling down to the door and use it to support EMT. Or just tie the cable to the unistrut. Not as pretty, but cheaper.

I'll think more on it tonight.

Sam

Last edited by Silversam; 11/23/16 12:48 AM.

"Where are we going and why are we in this hand basket?"
meisgq #605751 11/23/16 11:45 AM
Joined: Feb 2005
Posts: 12,342
Likes: 3
Member
***
Offline
Member
***
Joined: Feb 2005
Posts: 12,342
Likes: 3
Quote
I'm thinking 1/2" EMT but I believe EMT also has to be secured at least once every 10ft.

Secured according to what? The NEC has nothing to say about something like this. 1-1/4" with a steel setscrew or compression coupling and secured at both ends. Bob's your uncle.

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
meisgq #605756 11/23/16 01:56 PM
Joined: May 2007
Posts: 5,058
Likes: 5
Moderator-1A2, Cabling
*****
Offline
Moderator-1A2, Cabling
*****
Joined: May 2007
Posts: 5,058
Likes: 5
Hal -

I agree that the NEC doesn't care about conduit for data wiring, but I do believe that two lengths of ½" EMT, even if secured at both ends would probably come apart at the coupling soon enough. Between vibration and banging I wouldn't trust them to be secure. ½" Rigid pipe m i g h t hold together but personally, I think unistrut & emt with 2 straps per length of tubing would certainly do the trick. Not too difficult, not too expensive and certainly secure.

Sam


"Where are we going and why are we in this hand basket?"
meisgq #605760 11/23/16 05:46 PM
Joined: Feb 2005
Posts: 12,342
Likes: 3
Member
***
Offline
Member
***
Joined: Feb 2005
Posts: 12,342
Likes: 3
The only problem I have with Kindorf or Unistrut and 1/2" EMT is that the clamps are designed for the pipe crossing the channel at 90 degrees, not running parallel to it. I think Caddy may make something that will work but the sizes are for copper tubing.

-Hal


CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
hbiss #605761 11/23/16 10:36 PM
Joined: Mar 2004
Posts: 488
Member
Offline
Member
Joined: Mar 2004
Posts: 488
What about tie the cable to fixture chain?

hbiss #605771 11/24/16 01:27 PM
Joined: May 2007
Posts: 5,058
Likes: 5
Moderator-1A2, Cabling
*****
Offline
Moderator-1A2, Cabling
*****
Joined: May 2007
Posts: 5,058
Likes: 5
"The only problem I have with Kindorf or Unistrut and 1/2" EMT is that the clamps are designed for the pipe crossing the channel at 90 degrees, not running parallel to it."

¼" kindorff nuts and "Mae West" (mineralac) clamps.

Works for me.

Sam


"Where are we going and why are we in this hand basket?"
meisgq #605777 11/24/16 05:56 PM
Joined: Jun 2006
Posts: 8,732
Likes: 2
Moderator-Nortel, Computers, General
*****
Offline
Moderator-Nortel, Computers, General
*****
Joined: Jun 2006
Posts: 8,732
Likes: 2
Why not just use a piece of clear clothesline wire. Support top & bottom & be done with.


Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
Page 1 of 2 1 2

Moderated by  Silversam 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5