|
|
Joined: Oct 2006
Posts: 291
Member
|
|
Member
Joined: Oct 2006
Posts: 291 |
Have a Viking PA-2A paging unit to hookup to a Avaya IP Office Rls 9.1, was told I also need a Bogen Interface unit for this to work ???
Voice/Data & Cable Contractors, Avaya/Lucent, Nortel and Panasonic Serving Central Fl
|
|
|
|
|
Joined: Feb 2005
Posts: 12,359 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,359 Likes: 4 |
No, if you can make that thing do a page port or have a spare analog trunk port. I have no idea what Bogen unit they are talking about.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Oct 2006
Posts: 291
Member
|
|
Member
Joined: Oct 2006
Posts: 291 |
Voice/Data & Cable Contractors, Avaya/Lucent, Nortel and Panasonic Serving Central Fl
|
|
|
|
|
Joined: Oct 2006
Posts: 291
Member
|
|
Member
Joined: Oct 2006
Posts: 291 |
It says I need a Bogen VMT-1A Line input / output matching transformer to be connected across the tip & Ring of a analog port on the combo card, keeping the port in a constant "Off Hook" condition, ????
Voice/Data & Cable Contractors, Avaya/Lucent, Nortel and Panasonic Serving Central Fl
|
|
|
|
|
Joined: Aug 2006
Posts: 1,813 Likes: 15
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,813 Likes: 15 |
You'd need the Bogen interface if you were using a Bogen amplifier, probably to provide talk battery or to match impedance. Read the product info for the Viking equipment here. It should be all you need.
Last edited by JBean3329; 12/09/16 07:46 PM.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
|
Joined: May 2004
Posts: 1,669 Likes: 4
Moderator-Avaya
|
|
Moderator-Avaya
Joined: May 2004
Posts: 1,669 Likes: 4 |
WMT1A keeps 600Ohm resistance on the line so the IP Office knows it is there.
If you dont want to use that, you have to prove to the system there is a device on that port. So you would need to have an analog device plugged in, and off-hook, when the IPOS reboots every time. Then you can plug in your paging.
If the system reboots without the off-hook device plugged in, the port will not work.
|
|
|
|
|
Joined: Feb 2005
Posts: 12,359 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,359 Likes: 4 |
[I] was told...It says... Who is this "it" anyway? -Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Feb 2005
Posts: 12,359 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,359 Likes: 4 |
If the system reboots without the off-hook device plugged in, the port will not work.  -Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Oct 2006
Posts: 291
Member
|
|
Member
Joined: Oct 2006
Posts: 291 |
Thanks for the feedback guys, Hal, Mongo & JB ( it ) was a tech support group i was using for a few years, it seems they have made a lot of cutbacks and people have left, the tech support they have now, seems to shoot from the hip alot, if & when they get back to you, but again, thanks for your help and support, and Happy Holidays to all
Voice/Data & Cable Contractors, Avaya/Lucent, Nortel and Panasonic Serving Central Fl
|
|
|
|
Forums84
Topics94,552
Posts640,109
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
