|
Joined: Oct 2006
Posts: 1,354
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,354 |
SV9100 with a SVR2 blade and all proper premium licenses.
I'm not having any luck connecting to the SVR2 server. On the 9100, I've enabled server availability in 10-69-01, entered an IP in 10-69-02 and made the port=8080 in 10-69-03. restared the 9100.
I've tried with a patch cable in Eth 0 and in Eth 1, but I cannot connect. Can't ping it either. Looked in the UC Suite manual and didn't find any help.
Any suggestions where I should look? Thank you! Jim
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
10-69-03 I use 8888. 8080 is normally suite web access. You have to upate the ip address by connecting directly & changing from default.
Last edited by DrPbx; 01/02/17 05:07 PM.
|
|
|
|
Joined: Oct 2006
Posts: 1,354
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,354 |
Got it! Finally found the inServer config guide on ntac after searching for uc server. I'd been searching for uc suite and svr2 before. Everything is like a scavenger hunt. And I don't want to play anymore.
Thanks for the help DrPBX.
Jim
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Yes, that manual was very hard to find on NTAC.
|
|
|
Forums84
Topics93,827
Posts636,768
Members49,645
|
Most Online5,661 May 23rd, 2018
|
|
1 members (nameless),
29
guests, and
19
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|