|
|
|
|
Joined: Dec 2010
Posts: 8
Member
|
|
Member
Joined: Dec 2010
Posts: 8 |
I have an external conversion set up in Conventional Networking to send calls to an external cell phone. If I dial the number in the conversion table from an internal extension, the call goes out as programmed. However, if I take the appropriate number from 28.01 and enter it as the conversion number in 25.02 for one of my DNIS numbers, it rings to the attendant station rather than being forwarded out. Is there some other programming that I need to do in order to get this to work, or is it just not possible?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,813 Likes: 15
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,813 Likes: 15 |
I can remember making his work, but if I remember correctly, I had to direct the call to an extension set up to remote forward to the external number. You can select this as a destination from an auto attendant as it will treat it as an extension. I don't think a networking access code is a valid entry in Class 25.02, unless you're routing to networked system, in which case you have to point the call at a far end extension.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
Forums84
Topics94,570
Posts640,212
Members49,872
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
47
guests, and
48
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
