web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#60884 11/07/08 12:43 AM
Joined: Aug 2005
Posts: 908
Member
OP Offline
Member
Joined: Aug 2005
Posts: 908
The person being called hears static. This occurs on both CO and IC calls. It is random, not related to a specific card, cabinet or type of call.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#60885 11/07/08 04:27 AM
Joined: Apr 2005
Posts: 51
Member
Offline
Member
Joined: Apr 2005
Posts: 51
If it's specific to only one person, try swapping out their phone (the entire keyset) with another one and see if the static issue follows the phone or not.

If it follows the phone, then start swapping out handsets, and associated cables one at a time to isolate the failed component.

If it doesn't follow the phone, try changing the line that connects the keyset to the wall jack. It may also be the wall jack itself or the wiring in the wall between the jack and the card in the cabinet.

I understand the issue is random so it will take some time to test these things.

Rx

#60886 11/07/08 06:23 AM
Joined: Aug 2005
Posts: 908
Member
OP Offline
Member
Joined: Aug 2005
Posts: 908
It affects numerous phones on different cards in different cabinets.

#60887 11/07/08 08:35 AM
Joined: Apr 2005
Posts: 51
Member
Offline
Member
Joined: Apr 2005
Posts: 51
I actually had the same issue at a remote site years ago - for us it was a daughter card that was installed on one of the IPRC's that wasn't configured in Session Manager. We removed that daughter card and the issue disappeared. Not sure how a daughter card on an IPRC effected all calls (CO and IC) but it did.

We also never determined if the daughter card was bad or if it caused the issue because it wasn't configured in Session Manger, but perhaps this will give you a starting point.

I would also suggest checking the ground on all your cabinets. They might all be connected at the same grounding point in your telephone closet or on your rack, so you may have to check the ground further down closer to wherever it goes, possibly in the dmarc for the building.

Hope that helps you - it took us a good 6-9 months before we finally demanded the local Inter-tel office replace every single card in our system to try and resolve the issue, and that is when they found the daughter card on the IPRC that we weren't aware of.

Rx

#60888 11/07/08 11:55 AM
Joined: Nov 2006
Posts: 241
Member
Offline
Member
Joined: Nov 2006
Posts: 241
Is it on handset and speakerphone calls or just one?


60% of the time it works every time
#60889 11/10/08 05:18 AM
Joined: Aug 2005
Posts: 908
Member
OP Offline
Member
Joined: Aug 2005
Posts: 908
Racer X, 6-9 months? Nice. I'll check the ground. Both of our IPRC cards have daughter cards. They are programmed in Session Manager. Thanks for the tip.

SoCalJake, it is handset and headset. We so rarely use the speakerphone, I can't really answer that part. This may be unrelated, but I had a problem with some phones no longer having use of the headset. Unplugging the phones for a few moments temporarily fixed that problem. Also, my six line display was only displaying the top two lines. Unplugging it momentarily fixed that as well. These are keysets, not IP phones. I've heard no complaints from IP phone users. Yet.

#60890 11/10/08 06:52 AM
Joined: Aug 2005
Posts: 908
Member
OP Offline
Member
Joined: Aug 2005
Posts: 908
Just to add to the bizarre nature of this problem, placing a call with static on hold, and then returning to the call, makes the static go away.

#60891 11/10/08 07:24 AM
Joined: Aug 2005
Posts: 908
Member
OP Offline
Member
Joined: Aug 2005
Posts: 908
An Inter-Tel tech just gave me a tip. Static may occur on a system if an LSC card w/ a daughter card is attached to a system, but the daughter card is not programmed in the system. And vice versa. I recently swapped out an LSC card to trouble shoot a problem with our paging system. I've returned the original LSC card. I'll let you know if that fixed the issue.

#60892 11/11/08 07:43 AM
Joined: Aug 2005
Posts: 908
Member
OP Offline
Member
Joined: Aug 2005
Posts: 908
That was it. The LSC card in the system did not have a daughter card. I had replaced it with an LSC that had a daughter card. Placing the original card back in the system eliminated the static.


Moderated by  Stix1 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,712 CTX100 install
186,796 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
jc2it 4
teleco 4
Who's Online Now
1 members (Toner), 116 guests, and 244 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5