Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Oct 2007
Posts: 46
Member
OP Offline
Member
Joined: Oct 2007
Posts: 46
Upgrading a 7400 with one expansion cabinet. Successfully upgraded the MP-40 and the LP-40. Used MMC818 to push the new LCP program to the card and it appeared to go normally. We were upgrading the LCP from v4.20 to v4.33. After several minutes of the phone display saying "Media Busy" the phone went back to normal as it does after pushing programming. The LCP then went through different cycles of the LED's (always repeating), but the card never came up after waiting 30 minutes. Rebooted the card...same issue. Rebooted the system - same issue. I did try to push both the old (v4.20) and new (v4.33) to the card as it was going through its LED pattern, but any time I try that, I receive an error message "write failure".

Brought a spare LCP over (v4.17) and it came up without an issue. Distributor tech support said there's nothing I can do - but wondering if anyone has any experience using the SIO port to recover a card such as updating an MGI/OAS.


Atcom VoIP Demo
VoIP Demo
Joined: Jun 2006
Posts: 2,947
Likes: 3
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 2,947
Likes: 3
There is a known issue upgrading lcp 4.17 and 4.20 to >4.31
You need to goto 4.31 first then 4.33 or higher.

There is a recovery procedure which will take the lcp to 4.30 then you can flash whatever you want.

Joined: Oct 2007
Posts: 46
Member
OP Offline
Member
Joined: Oct 2007
Posts: 46
Thanks for the reply. Is there a tech bulletin somewhere on WEOPERATIONS or ?

Joined: Jun 2006
Posts: 2,947
Likes: 3
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 2,947
Likes: 3
I have no idea, I'm not from the usa.
If not I can send you our bulletin on it

Joined: Oct 2007
Posts: 46
Member
OP Offline
Member
Joined: Oct 2007
Posts: 46
I've looked and cannot find any reference to a tech bulletin here. If you wouldn't mind sending what you have, I would appreciate it.

Joined: Jun 2006
Posts: 2,947
Likes: 3
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 2,947
Likes: 3
PM Sent

Joined: Jun 2009
Posts: 61
Member
Offline
Member
Joined: Jun 2009
Posts: 61
I just had one do the same thing. Good to know about the update procedure (for the next one). Can you send me that tech bulletin?

Joined: Jun 2006
Posts: 2,947
Likes: 3
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 2,947
Likes: 3
PM Sent

Joined: Aug 2006
Posts: 287
Member
Offline
Member
Joined: Aug 2006
Posts: 287
I know it a bit late but I've got 2 LCP's that need recovery.

I have the recovery procedure and the DPSME.H file but within the guide it says I need to send the DPSCP.H file is this the same thing or do I need a different recovery procedure?

Joined: Dec 2007
Posts: 63
Member
Offline
Member
Joined: Dec 2007
Posts: 63
Same issue here.

Killed 2 LCPs today as part of upgrades for same customer / multiple sites - both coming from v4.17 frown

Running out of spares.

If we could get the bulletin / recovery procedure it would be most appreciated.

Page 1 of 2 1 2

Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,738
Posts636,407
Members49,615
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
aaronazatian, bg6214, Jigger, mkpgt, willtech
Newest Members
AMS Technology C, Chrontel, RonZ1971, Michael1948, lllDez
49,615 Registered Users
Top Posters(30 Days)
Toner 8
jsaad 7
Who's Online Now
0 members (), 55 guests, and 15 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5