Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#611838 08/08/17 06:44 PM
Joined: Nov 2006
Posts: 182
juno Offline OP
Member
OP Offline
Member
Joined: Nov 2006
Posts: 182
I need a little help on how to swap out 2 4x8 cards and install a 16 psub I need a spare slot for MBU card.
I was told to remove 4x8 cards and reboot and then install the new 16 port card.
do I have to remove the cards from program first.
jim

Atcom VoIP Demo
VoIP Demo
juno #611845 08/08/17 11:19 PM
Joined: Aug 2006
Posts: 1,769
Likes: 7
Moderator-Iwatsu
*****
Offline
Moderator-Iwatsu
*****
Joined: Aug 2006
Posts: 1,769
Likes: 7
Remove the 408s in programming then reboot the ECS. Make sure it's all the way back up and verify in programming that the 408s are no longer installed. Set the make busy switch on the 16PSUB, slide it in the slot and let the switch find it and configure it then program the ports as needed. This is more an exercise in patience than anything else...


Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.

Moderated by  JBean3329 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,830
Posts636,775
Members49,645
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
Florencio, HtownDan, Kerry2362, Lorena Catalan, SWB, telecom5000, Tex Tel Marine
Newest Members
Marjan Shaw, KoolBreeze, PhoneGuy827, julesm, Helen.D
49,645 Registered Users
Top Posters(30 Days)
ramo 12
pvj 11
Toner 9
Who's Online Now
0 members (), 182 guests, and 16 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5