Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Feb 2010
Posts: 444
OP Offline
Joined: Feb 2010
Posts: 444
I had a caller ID card fail on an exiting system (MICS 7.1 FC) I notice that there are several different part numbers on the caller ID cards .The customer has (8) Lines 2 cards The card that failed was a
NT7B75AAAE The card that was in the system and working in either slot was NT7B75AAAG

I replace the card that failed with a NT7B75AAAE and got the same results as the card that failed I tried 2 cards both getting the same results no dial tone /static I tested the cards prior and they appeared to work fine on my test bench

I had a 3rd card which seem older and heavier look like it had more parts on it (it was made in Canada) NNTM845512PF/NT5B41GB-93 and this card seemed to fix the problem

The software on the phone system is 7.1 FC

is there some compatibility issues with these caller ID Cards

Just wondering



Atcom VoIP Demo
VoIP Demo
Joined: Dec 2007
Posts: 386
Joined: Dec 2007
Posts: 386
I believe we have experienced issues with accepting ring voltage range/variation between some of the different revision of T/Cards, but it was quite some time ago and can't remember the specifics.


Moderated by  MooreTel, NTlayoff 

Link Copied to Clipboard
Forum Statistics
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
bravesfan, cjvio, Cory S., Jack Scott, l.landeche, TexasD
Newest Members
devben, bubblegum, Carl Arnold, Marjan Shaw, KoolBreeze
49,648 Registered Users
Top Posters(30 Days)
ramo 13
pvj 11
Toner 9
Who's Online Now
0 members (), 28 guests, and 19 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5