|
|
|
|
Joined: Aug 2005
Posts: 908
Member
|
|
Member
Joined: Aug 2005
Posts: 908 |
IP phone UDP information can be saved using the Trace function. The manual says little else. Can the Trace host be any machine? What port should be used? How and where is the information saved?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2005
Posts: 79
Member
|
|
Member
Joined: Jul 2005
Posts: 79 |
We typically use a program called Wireshark to log specific port information for troubleshooting. Depending on if the phone is connected to an Axxess or a 5000. Axxess starts at UDP ports 5004 for the first connected call and goes up. The 5000 starts at UDP port 6004 and up.
|
|
|
|
|
Joined: May 2005
Posts: 526
Member
|
|
Member
Joined: May 2005
Posts: 526 |
For Wire Shark I've always attached my pc to a HUB, the device and the network to the hub. Then I'm watching throught the hub.
|
|
|
|
|
Joined: Nov 2006
Posts: 241
Member
|
|
Member
Joined: Nov 2006
Posts: 241 |
Inter-Tel has a Trace utility which listens to phones programmed to point to it. Port 5568.
60% of the time it works every time
|
|
|
|
|
Joined: Aug 2005
Posts: 908
Member
|
|
Member
Joined: Aug 2005
Posts: 908 |
How might I get this utility?
|
|
|
|
|
Joined: Nov 2006
Posts: 241
Member
|
|
Member
Joined: Nov 2006
Posts: 241 |
It used to be on their FTP server. I don't see it there any longer. Try calling Tech Support. It's called IP Device Debug Viewer.
60% of the time it works every time
|
|
|
|
|
Joined: Aug 2005
Posts: 908
Member
|
|
Member
Joined: Aug 2005
Posts: 908 |
|
|
|
|
|
Joined: Sep 2006
Posts: 139
Member
|
|
Member
Joined: Sep 2006
Posts: 139 |
For IP sets with relatively new firmware (which you can request from your dealer if you need to flash the phones) you can connect to the IP set with a web browser (on port 10000 I think), enter a login (which you should get from your dealer or unless it is against some rule I could PM it to you) then you will see an option for 'port monitoring' or maybe it is called 'mirroring'.
What this does is for that IP phone, copy all of the network IP packets to the PC ethernet port on the IP phone. Now you can connect a network interface on a PC running wireshark to the PC connector on the IP phone and monitor all the traffic sent/received for that IP phone. The monitoring lasts until the IP set is reset.
|
|
|
|
|
Joined: Aug 2005
Posts: 908
Member
|
|
Member
Joined: Aug 2005
Posts: 908 |
Thank you guys. I was able to obtain a copy of the IP Device Debugger program. It's pretty slick. But I honestly don't know how to make sense of the information. Is there any documentation beyond the onboard help files?
|
|
|
|
|
Joined: Aug 2005
Posts: 908
Member
|
|
Member
Joined: Aug 2005
Posts: 908 |
What is the latest firmware version? I have 8600 series phones.
|
|
|
|
Forums84
Topics94,518
Posts639,981
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (JBean3329),
296
guests, and
34
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
