|
Joined: Feb 2017
Posts: 23
Member
|
OP
Member
Joined: Feb 2017
Posts: 23 |
Customer with an OS7100 running ver.4.14k (out of state customer so updating software at this point is not an option). IT tech changed ISP and a new public IP address is configured in the system LAN Parameters but the public IP address for the MGI card is not editable. The MGI is holding on to the old public IP address. Able to connect IT Tool to the phone system remotely using the new pubic IP address
Have tried a reboot and programming through remote phone but no luck getting the MGI Pubic IP Address to update to the new address.
Is there a trick to getting this IP address updated?
|
|
|
|
Joined: Jun 2006
Posts: 2,967 Likes: 3
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 2,967 Likes: 3 |
I've had this issue. It's a bug either with it tool or the software. I think i had to use a phone to change the public ip on the system and it then changed the mgi.
|
|
|
|
Joined: Feb 2017
Posts: 23
Member
|
OP
Member
Joined: Feb 2017
Posts: 23 |
Connecting a remote IP phone, changing the public IP address of the system, and then completing the required system reboot worked. Even using a remote IP phone that is a couple of states away.
Thank you very much!!!
|
|
|
Forums84
Topics93,827
Posts636,768
Members49,645
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
13
guests, and
20
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|