|
|
|
|
Joined: Oct 2007
Posts: 81
Member
|
OP
Member
Joined: Oct 2007
Posts: 81 |
Hi
TVA50 has Caller-ID Modify Tables No. 1 2 3 4
When you open any of them, there are 10 presets.
I don't understand, no matter which preset you select , after you click OK and reopen it, it is always #1. Isn't it supposed to retain the preset you had selected and saved?
I don't understand what is going on. I think the mess started after 3.15 update.
???
Thanks
TVA-50, TA-824 with 16 ext, 6 lines and a LAN card
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2005
Posts: 16
Member
|
|
Member
Joined: Sep 2005
Posts: 16 |
I assume you mean the TDA50. If not, I apologize.
Change the Caller-ID Modify table 1 thru 4 as needed, then assign the proper table to the Line Group. For example, trunks 1-4 are analog lines, trunks 3-6 are SIP trunks. The caller ID from the two sources may produce different results so the tables are used to end up with the proper display. In this case trunks 1-4 could be assigned to Trunk Group 1 and using Table 1, trunks 3-6 are assigned to Trunk Group 2 using table 2.
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
157
guests, and
400
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
