|
|
|
|
Joined: Sep 2006
Posts: 139
Member
|
|
Member
Joined: Sep 2006
Posts: 139 |
Hi, is there a way I can confirm that our PBX (Axxess v11) is providing the caller ID name field correctly to our provider? Or some typical setting that is needed for this?
Whatever I configure for Calling Party Name on a station, outbound calls from that station show our provider's default name for our DID numbers. If I specify the Calling Party Number this does work but not the name.
We have PRI circuits using NI2 signaling.
Provider says that they are set up correctly and they question if we are sending a name.
Thanks for any help or advice!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2006
Posts: 139
Member
|
|
Member
Joined: Sep 2006
Posts: 139 |
Telecom provider did some research and discovered that even though their provisioning database says we are NI2, they are actually set in the switch for NI1.
PBX is set for NI2. If I ask provider to switch to NI2 off-hours will there be any impact to PBX?
|
|
|
|
Forums84
Topics94,534
Posts640,048
Members49,854
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Not_sirius),
422
guests, and
21
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
