|
Joined: Nov 2001
Posts: 467 Likes: 1
Member
|
OP
Member
Joined: Nov 2001
Posts: 467 Likes: 1 |
I have a cabinet that has a 6 port fiber card in it, that is not being used, and I need it for another install. Is there anyway to remove it and not have the system go into maintenance mode?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Aug 2002
Posts: 1,072 Likes: 1
Member
|
Member
Joined: Aug 2002
Posts: 1,072 Likes: 1 |
Every time I've done that the system goes into maintenance. Never have I removed it from a system in service. I would just get another card.
|
|
|
|
Joined: Nov 2001
Posts: 467 Likes: 1
Member
|
OP
Member
Joined: Nov 2001
Posts: 467 Likes: 1 |
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
If you want to remove a card from a spare cabinet then do a STARTUP and set what ever parameters, when it states "Applying Template" wait 15 to 20 seconds than pull the power. Remove the card, put the MICS on a shelf. Next time you need the MICS put any required software (and cards if need) into it then power up as if fresh install. This is also the same process to do at site when jumping softwares without the Tool Kit or other software's to step up and that you do not mind re-programming from scratch.
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
Have you tried this yet teleco?
|
|
|
|
Joined: Nov 2001
Posts: 467 Likes: 1
Member
|
OP
Member
Joined: Nov 2001
Posts: 467 Likes: 1 |
Sorry Curlycord, haven't been back on the forum, just dealt with the issue and and finished the install. I did print out your suggestion and will try it if I need to use that cabinet again. Thanks
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
|
|
|
Forums84
Topics94,291
Posts638,806
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
3 members (Toner, justbill, Yoda),
172
guests, and
409
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|