|
|
Joined: Sep 2005
Posts: 9,285 Likes: 6
Admin
|
OP
Admin
Joined: Sep 2005
Posts: 9,285 Likes: 6 |
I need a Cat 5 tester that will locate the port a cable in connected to. I have one that will blink the link light on the switch but with all the others flashing I can never see the one that blinking. Toning will work some times but not good enough I'm getting sick of walking back and forth between PC and switch to find the cable/port. I'm also looking to get a fiber tester that will just test good/bad light source, connections and fiber. Any suggestions are welcome
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2007
Posts: 6,799 Likes: 18
Retired Admin
|
Retired Admin
Joined: Dec 2007
Posts: 6,799 Likes: 18 |
Since DTX is not a valid tester anymore the companies I have been working for migrated to Versiv for copper and fiber. Would something like this work for you? Probably more expensive than a Super Bright LED flashlight and a volunteer on the other end.
|
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
I used to use the T3 Innovations Net Prowler to chase down ports on a working active installation, I could find IP addresses, perform speed check and thruput tests, great tester, it is now distributed by Platinum Tools.
Last edited by Derrick; 06/26/18 10:15 AM.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Dec 2007
Posts: 6,799 Likes: 18
Retired Admin
|
|
Retired Admin
Joined: Dec 2007
Posts: 6,799 Likes: 18 |
Net Prowler"Link light to identify location on a hub/switch/router port"
|
|
|
|
|
Joined: Mar 2013
Posts: 144
Member
|
|
Member
Joined: Mar 2013
Posts: 144 |
Linkrunner will get the job done if they have managed switches and it’s properly configured, haven’t heard of anything that will work with unmanaged switches.
I agree with Professor, fastest way to map the network is another set of eyes on switch side
|
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Net Prowler didn't care if managed or unmanaged switch, it would blink the port. You can adjust the cadence to make it easier to spot among other blinking lights.
Last edited by Derrick; 06/26/18 11:01 AM.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Mar 2018
Posts: 345 Likes: 1
Member
|
|
Member
Joined: Mar 2018
Posts: 345 Likes: 1 |
It is a pain, but if you document what is live, then plug or unplug what you are working on check to see the difference. Not a good way to do it, but it is effective (just time consuming)
The Cloud is just someone else's computer!
|
|
|
|
|
Joined: Dec 2007
Posts: 6,799 Likes: 18
Retired Admin
|
|
Retired Admin
Joined: Dec 2007
Posts: 6,799 Likes: 18 |
It is a pain, but if you document what is live, then plug or unplug what you are working on check to see the difference. Not a good way to do it, but it is effective (just time consuming) This method doesn't work in a Data Center... In a Data Center we label the patch cords on both ends with a set of "from/to", example: From rack 10, patch panel 8, port 48 to rack 15, patch panel 2 port 2. (two labels on each end) R10-P08-45 R15-P02-02 R15-P02-02 R10-P08-45
|
|
|
|
|
Joined: Jun 2006
Posts: 8,732 Likes: 2
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,732 Likes: 2 |
I thought you were about to retire Merritt???
I rigged a 8p8c connector to tone on Pair 4. Usually can pick up the tone without issues...
Last edited by MooreTel; 06/26/18 01:00 PM.
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: Dec 2007
Posts: 6,799 Likes: 18
Retired Admin
|
|
Retired Admin
Joined: Dec 2007
Posts: 6,799 Likes: 18 |
I thought you were about to retire Merritt??? You can retire, but you can never leave.
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Professor Shadow),
128
guests, and
297
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
