|
|
Joined: Jun 2006
Posts: 40
Member
|
|
Member
Joined: Jun 2006
Posts: 40 |
Hello,
When calling into DK In-Skin Voice Mail the voice mail answers but it does not recognize touch tones. I'm going to have the tech replace the DMTF (RRCS) Receiver card in cabinet. Any other ideas? Also he could not change Program 03-01 from 91 to 94 ??
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
What are you testing with and did carrier change?
|
|
|
|
|
Joined: Aug 2002
Posts: 4,932 Likes: 1
Administrator
|
|
Administrator
Joined: Aug 2002
Posts: 4,932 Likes: 1 |
Before you replace the DTMF card log in to the voicemail with VM Manager and see if you have run out of disk space.
|
|
|
|
|
Joined: May 2002
Posts: 4,309 Likes: 8
Moderator-Avaya, Polycom
|
|
Moderator-Avaya, Polycom
Joined: May 2002
Posts: 4,309 Likes: 8 |
Shouldn't this be in the Toshiba section
|
|
|
|
|
Joined: Aug 2002
Posts: 4,932 Likes: 1
Administrator
|
|
Administrator
Joined: Aug 2002
Posts: 4,932 Likes: 1 |
DOn't think it really matters the OP hasn't replied
|
|
|
|
|
Joined: Dec 2013
Posts: 1
Member
|
|
Member
Joined: Dec 2013
Posts: 1 |
If the processor can't be changed to anything besides 91, that will be the problem. The processor code 91 shows no dtmf receiver on board. 03 00 is usually for the processor assignment, not 03 01.
|
|
|
|
|
Joined: Jun 2004
Posts: 399
Member
|
|
Member
Joined: Jun 2004
Posts: 399 |
LOL, as SSPhone mentioned, this is kind of a moot point since the OP hasn't returned, but in case someone does a search for "can't change from 91", I finally dug out my dusty programming manuals.
for the smaller RTCUA and RTUCB processors you program only slot 00 with the 91-94 code depending on the DTMF receiver. Slot 01 would be unused.
for the RTCUBA/RTCUBB processor pair, you still program slot 00 with 91-94, and slot 01 must be 91 (sounds like that might be the OP's case).
Apparently only the C/D and E/F pairs would take a receiver on the second card and change the slot 01 programming.
|
|
|
|
Forums84
Topics94,515
Posts639,962
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/ad-icon/1013.gif){kind=icon}
