|
|
|
|
Joined: Jul 2012
Posts: 129
Member
|
OP
Member
Joined: Jul 2012
Posts: 129 |
We removed a Spine Bay that had several Digital Phones and Console on it. We installed a new Digital Card in a EL\ML Peripheral cabinet. We were able to program and add all the digital phones on the new card. However when trying to add the console in form 7 it does not show the Bay slot circuit of the new card at all. It is installed and programmed in form 1. The available ports also show up in form 9 and 45. Never seen this before.
Thanks in Advance
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2008
Posts: 392
Member
|
|
Member
Joined: Sep 2008
Posts: 392 |
I think that in the LW16 it might be looking for a card that is in a high power slot. Is the existing peripheral cabinet a tower? That would be slots 5-8.
Not totally sure about this.
|
|
|
|
|
Joined: Jul 2012
Posts: 129
Member
|
|
OP
Member
Joined: Jul 2012
Posts: 129 |
The peripheral cabinet is a EL\ML cabinet. It is in slot 2 of that cabinet. The card shows up and i can program in form 9. But the empty circuits do not show up in form 7.
Thanks in Advance
|
|
|
|
|
Joined: Jul 2012
Posts: 129
Member
|
|
OP
Member
Joined: Jul 2012
Posts: 129 |
So I programmed a dnic card in slot 5 and it shows up in form 7!
Thanks in Advance
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
134
guests, and
352
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
