sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems Memo info on Caller ID

Ok, I am stumped. I remember you can tag Caller ID with memo information but for the life of me I cannot get it to work. I have the caller ID correct because I can route it but it simply wont display on the extension. I have the extension flagged as well for memo information. Stumped. Any help would be appreciated. Thanks.

22-11-03

That isn't it. In your speed dialing area there is a way to tag memo's to incoming caller ID. This is supposed to be flagged on in Multiline Ext setting per ext. This allows you to tag calls with info. Thanks for answering.

15-02-58



AKgreatland

Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
□ Level 1 – these are the most commonly assigned programs for this feature.
□ Level 2 – these are the next most commonly assigned programs for this feature.
□ Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.


Program
Number Program Name/Description Input Data


13-01-03 Speed Dialing Option Setup – Number of Common Speed Dialing Bins
Designate the bins the system uses for System Speed Dialing.
13-04-01 Speed Dialing Number and Name – Speed Dialing Data
Enter the System and Group Speed Dialing numbers and names.
0 ~ 10000
0 = No Common Speed Dialing


Maximum of 24 digits (0 ~ 9, ,
#, @, P, R)
@ = Wait for Answer Supervision - ISDN trunks only
P = Pause - Analog Trunk Only R = Hook flash - Analog Trunk Only



13-04-08 Speed Dialing Number and Name – Memo Display 1
This can only be set using Web Pro or PC Pro and determines what will be displayed on line 1 of the
multiline telephone when Program
15-02-58 is set to memo.
13-04-09 Speed Dialing Number and Name – Memo Display 2
This can only be set using Web Pro or PC Pro and determines what will be displayed on line 2 of the
multiline telephone when Program
15-02-58 is set to memo.
13-04-10 Speed Dialing Number and Name – Memo Display 3
This can only be set using Web Pro or PC Pro and determines what will be displayed on line 3 of the
multiline telephone when Program
15-02-58 is set to memo.

























Yep that's right out of the manual and no go.

Ok, got it working on my 9100 but the heck I can figure out WHY it just stated working. 8100 I am gonna upgrade firmware and see.