|
|
|
|
Joined: Feb 2019
Posts: 14
Member
|
|
Member
Joined: Feb 2019
Posts: 14 |
I'm trying to enable and setup Call Coverage so that x102 can intercept calls ringing at x101 when user (x101) is away from desk. Following the Feature and Operation Manual (p. 193) I was able to activate Call Coverage on x101 but am unable to Assign the Call Coverage Flex Button on x102. When, at x102, I press Trans/PGM, then the Flex Key I want to assign, I dial 67 (according to manual), and it says Invalid.
What am I missing? Is there a guide somewhere that shows all possible Flex Key Programming feature options?
Last edited by Ryan S.; 02/22/19 10:30 AM.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Call Coverage Enable (PGM 111 button 12, lots of parameters so us the web admin)
iPECS IP & LDP Phones
To assign a {CALL COVERAGE} button at the covering station
[TRANS/PGM] + {FLEX} + “67†+ covered Station number + [HOLD/SAVE]
To activate Call Coverage at the covered station
1. Press the [TRANS/PGM] button.
2. Dial “141â€, the Call Coverage code.
3. Dial “1†to enable or “0†to disable Call Coverage.
To assign ring for a {CALL COVERAGE} button
1. Press the [TRANS/PGM] button.
2. Dial “142â€, the Call Coverage Ring code.
3. Dial the delay in ring cycles (“0â€-“9â€).
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Feb 2019
Posts: 14
Member
|
|
Member
Joined: Feb 2019
Posts: 14 |
Derrick, I appreciate the information.
So, I'm guessing that the problem I was having was with your first statement: Call Coverage Enable (PGM 111 button 12, lots of parameters so use the web admin)
Had I made sure that Call Coverage Enable was setup in Web Admin, I'm guessing I wouldn't have had the Invalid error when attempting the [TRANS/PGM] + {FLEX} + “67†.... step?
Does that sound right?
|
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Yes, it is a bit frustrating that it lets you take half the steps so to speak.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Forums84
Topics94,518
Posts639,977
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
181
guests, and
37
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
