web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#631792 08/13/19 09:10 AM
Joined: Feb 2013
Posts: 68
DD782 Offline OP
Member
OP Offline
Member
Joined: Feb 2013
Posts: 68
Old VM went bad, setting up new IES-32. when I call ext. I get Main Greeting (990) or if I call VM pilot #. Each Mailbox chain RNA & chain busy are set to RECORD. I know I am probably leaving just one thing out. I can see the VM port light - light up when a call comes in and it answers. I am just not routing something right. Advice Please, LYLE --- P.S. Does the CTX-100 and the IES-32 (IP add.) have to be in the same similar group to work together? How do you change the IP add. of the VM back to the factory default?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2003
Posts: 3,273
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,273
Likes: 1
I'm assuming that the old vm is also an ies32. If so, you will want to change the ip address on the new ies32 to whatever is listed in prog 801 in emanager. But there are a few other changes you'll need to make on the ies32 to make SMDI work.

Joined: Feb 2013
Posts: 68
DD782 Offline OP
Member
OP Offline
Member
Joined: Feb 2013
Posts: 68
I have checked loc. 801/802/803 these are set. when I call an ext. I get the main greeting (990) not the VM for that ext. When I go into a mailbox for an ext. and check messages and leave a message for another ext. it works, and message shows up in it's mailbox. What am I missing??????

Joined: Jan 2010
Posts: 937
Likes: 2
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jan 2010
Posts: 937
Likes: 2
Did you set the SMDI correctly to point to the IP address of the iES32 and on port 5000?
Do you have the IP address for the IP card set up correctly in the iES32?
Have you configured the channels to match the DKT ports for the VM in the CIX?


Regards
Carl
Joined: Feb 2013
Posts: 68
DD782 Offline OP
Member
OP Offline
Member
Joined: Feb 2013
Posts: 68
LOCATION 801
00=1, 01-TCP, 02-Client, 03=Asyncronization, 04=0, 05=192.168.1.103 Add. of VM IES-32, 06=5000, 07=1, 08=1
LOCATION 803
00=300SMDI#0, 01=1, 02=LAN
Table View= Device#300-SDMI #0 Client TCP:5000 192.168.1.103 (ALL OTHERS NOT ASSIGNED)
Using AETS1A Board not BSIS Board
CTX Set to Center Port of 50 -- VM boxes are 51-52-53-54
IES-32 Set to CTX and SDMI Voice Ports=51-52-53-54 (No Mailboxes Created)
LOCATION 200
All 4 VM Stations set to 02=DKT, 03=VM, 22=50
LOCATION 500 - 504
Set to No Answer, Destination=50, CF Template=1, All Call Types set to 50
LOCATION 209
01=Distributed, 02=50, 04=50, 05=1, 06= Enable, 07=Disable
LOCATION 218
Hunt Group #1, Members=51,52,53,54
Location 579
01=DN VMID, 02=Access Code Cancel, 03=Enable, 04=Disable, 05=10, 06=2, 07=Enable, 08=80msec, 09=Enable, 10=50, 11thru14=91, 15=92, 16=50, 17=10, 18=Enable, 19=10
LOCATION 580
00=51, 01=SMDI, 02=Enable, 03=B Tone & Ext.#, 04=Enable, 05=Non Blocking

Maybe Someone Can See What I Have Wrong or Left Out --- THANKS, LYLE

Joined: Jun 2003
Posts: 3,273
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,273
Likes: 1
In Stratagy ES Admin you need to assign the extension numbers 51-54 to the voice port numbers and need to tell the Stratagy what is the IP address of the CIX in the system settings.Reboot the ies32 or stop and start the Stratagy service.

Joined: Feb 2013
Posts: 68
DD782 Offline OP
Member
OP Offline
Member
Joined: Feb 2013
Posts: 68
Isn't that what LOCATION 200 & 801 are doing? I am not seeing in IES-32 where to put in the IP Add. of the CIX? Back to my original question will the CIX IP Add. of 192.168.254.253 and VM of 192.168.1.103 work together? I wanted to know how to change the VM IP Add. back to factory of 192.168.254.252 ---- so it will work when plugging both into a hub along with a laptop with eManger and Stratagy software. If I am missing something please specify LOCATION and # to change. THANKS, LYLE

Joined: Jun 2005
Posts: 2,702
Likes: 7
Member
Offline
Member
Joined: Jun 2005
Posts: 2,702
Likes: 7
Originally Posted by DD782
Back to my original question will the CIX IP Add. of 192.168.254.253 and VM of 192.168.1.103 work together? I wanted to know how to change the VM IP Add. back to factory of 192.168.254.252 ---- so it will work when plugging both into a hub along with a laptop with eManger and Stratagy software.

No, those IP addresses will not work together. They should be either both default 192.168.254.X or both on the 192.168.1.X subnet. They won't be able to communicate to each other. You should be able to PING both systems on your laptop at the same time.
I am assuming that the IES32 that you got already had that 192.168.1.103 IP address setup when you got it, and the CIX still has the default IP address 192.168.1.103.
Your choices will be to change the IP address of the IEs32 back to default of change the CIX to an IP address 192.168.1.253.

Have you ever used Netmeeting to connect to the IES? This could be a challenge because Netmeeting doesn't come on Windows anymre. This is on of the reasons why I have Windows XP running as a virtual machine on my Windows 10 laptop.

Joined: Feb 2013
Posts: 68
DD782 Offline OP
Member
OP Offline
Member
Joined: Feb 2013
Posts: 68
I have Netmeeting and have used to reset the passwords in the IES-32. Please advise me where the IP Info. is? THANKS, LYLE

Joined: Jun 2005
Posts: 2,702
Likes: 7
Member
Offline
Member
Joined: Jun 2005
Posts: 2,702
Likes: 7
It's been a while, but you change the system's IP address in the Windows Network Control panel.

Page 1 of 2 1 2

Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,712 CTX100 install
186,796 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
2 members (hitechcomm, nortelvoip), 164 guests, and 240 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5